Operating Screens; Ignition On, Engine Not Running; Engine Running - At Initial Start Up - MacDon M105 Operator's Manual

3.18.3 Operating Screens

The cab display module (CDM) and the windrower control module (WCM) provide information on several functions
for the engine, header, and windrower. The information displayed in various operating modes is described in the
following sections.
Figure 3.44: CDM Operating Screen
A - Display Selector for Upper Line
D - CDM Lower Line

Ignition ON, Engine Not Running

Display (upper line) (2–3 seconds)
HEADER DISENGAGED
Engine Running – At Initial Start Up
Display (upper line) (2–3 seconds)
HEADER TYPE AND SIZE
IN PARK
169890
OPERATOR'S STATION
B - Display
E - Display Selector for Lower Line
Description
Indicates HEADER DRIVE switch is OFF. OK to start.
Description
Ignition start, engine running.
Indicates ground speed lever (GSL) in N-DETENT.
On startup.
62
C - CDM Upper Line
Revision A