Detailed Programming Menu Flow Chart - MacDon M105 Operator's Manual

5. The CDM must be in programming mode to view the program menus. Press PROGRAM and SELECT on the
CDM to enter programming mode. Exit programming mode at any time by pressing PROGRAM or by turning
ignition to OFF.
6. Refer to the
Detailed Programming Menu Flow Chart, page 72
for each menu item.
NOTE:
Contact your MacDon dealer for information about software updates to the electronic modules. Your Dealer will
have the necessary interface tools and access to the latest software upgrades

Detailed Programming Menu Flow Chart

The programming menu flow chart is current for cab display module (CDM) software C107 and windrower control
module (WCM) software M102.
169890
OPERATOR'S STATION
for a listing of all the menus with user information
72
Revision A