Engine Running, Header Disengaged; Engine Running, Header Engaged, Auger Header - MacDon M105 Operator's Manual

Engine Running, Header Disengaged

Scroll through display with cab display module (CDM) switch or ground speed lever (GSL) switch.
Display (lower or upper line)
#####.# ENGINE HRS
#####.# UNIT HRS
#####.# HEADER HRS
###.# SUB ACRES
###.# SUB HECTARES (if metric)
###### TOTAL ACRES
###### TOTAL HECT (if metric)
##.# HEADER HEIGHT
##.# HEADER ANGLE
##.# VOLTS
FUEL |■■■■|■■■■|
ENGINE TEMP ### °F
ENGINE TEMP ### °C (if metric)
SCROLL
SUB-MENU (Lower Line Only)
##.# HEADER HEIGHT
FUEL |■■■■|■■■■|
ENGINE TEMP ### °F
ENGINE TEMP ### °C
ROAD GEAR (upper line)

Engine Running, Header Engaged, Auger Header

Scroll through display with cab display module (CDM) switch or ground speed lever (GSL) switch.
Display (Lower or Upper Line)
#####.# ENGINE HRS
#####.# UNIT HRS
#####.# HEADER HRS
##.# ACRES/HOUR
##.# HECTARES/HOUR (if Metric)
###.# SUB ACRES
###.# SUB HECTARES (if Metric)
6. Optional: Available with installation of Optional Expansion Module Installation—Whole Goods Bundle MD #B4666.
169890
OPERATOR'S STATION
Description
Total engine operating time.
Total windrower operating time.
Total header operating time.
Area cut since last reset. To reset, display SUB ACRES on lower line,
and hold down Program switch until display resets (5–7 seconds).
Total area cut by machine.
Distance setting (00.0–10.0) between cutterbar and ground.
Angle setting (00.0–10.0) header relative to ground. Optional.
Engine electrical system operating voltage.
Level of fuel in tank.
NOTE:
When fuel level is low, menu selections will be disrupted.
Engine coolant temperature.
Displays above items after 2–3 seconds; press SELECT to cancel.
Ground speed range switch in HIGH range. Only if 2 selected.
Description
Total engine operating time.
Total windrower operating time.
Total header operating time.
Actual cutting rate in acres (hectares)/hour.
Area cut since last reset.
63
6
Revision A