MacDon M105 Operator's Manual page 260

1. Open the hood. Refer to
Position), page 203.
2. Open the platform. Refer to
(Standard Position), page
3. Remove the radiator cap (A).
IMPORTANT:
Turn the cap (A) counterclockwise to the first notch to
relieve pressure before removing cap completely.
4. Check the coolant in the radiator using an antifreeze
tester. Tester should indicate protection
temperatures of -30°F (-34°C).
5. Inspect the radiator cap before reinstalling, refer to
Inspecting Radiator Cap, page
6. Replace radiator cap (A).
7. Close the platform. Refer to
(Standard Position), page
8. Close the hood. Refer to
Position), page 204.
Checking Coolant Level
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
Check coolant level in the coolant recovery tank daily.
1. Stop the engine and remove the key.
2. Open the hood. Refer to
3. Open the platform. Refer to
NOTE:
To view coolant capacities, refer to
4. Close the platform. Refer to
(Standard Position), page
5. Close the hood. Refer to
Position), page 204.
169890
MAINTENANCE AND SERVICING
5.4.3 Opening Hood (Highest
5.5.1 Opening Platform
205.
245.
5.5.2 Closing Platform
206.
5.4.4 Closing Hood (Highest
5.4.3 Opening Hood (Highest Position), page
5.5.1 Opening Platform (Standard Position), page
Lubricants, Fluids, and System Capacities, page
5.5.2 Closing Platform
206.
5.4.4 Closing Hood (Highest
to
Figure 5.94: Engine Cooling System
203.
Figure 5.95: Engine Cooling System
246
205.
199.
Revision A