Maintenance Schedule; Break-In Inspections - MacDon M105 Operator's Manual

5.7.11 Maintenance Schedule

The Maintenance Schedule specifies the recommended periodic maintenance procedures and service
intervals.Regular maintenance is the best insurance against early wear and untimely breakdowns. Following this
schedule will increase machine life.
For detailed instructions, refer to the various procedures in this chapter. Use the fluids and lubricants specified in
5.3.1 Recommended Fuel, Fluids, and Lubricants, page
Service Intervals: The recommended service intervals are in hours of operation. Where a service interval is given
in more than one time frame, for example, 100 hours or annually, service the machine at whichever interval is
reached first.
IMPORTANT:
Recommended intervals are for average conditions. Service the machine more often if operated under adverse
conditions (severe dust, extra heavy loads, etc.).
CAUTION
Carefully follow safety messages given in

Break-In Inspections

Hours
1 Hour Drive wheel nuts
A/C compressor belt
Caster wheel nuts
At 5 Hours
Caster wheel anti-shimmy dampener bolts
Walking beam width adjustment bolts
Walking beam width adjustment bolts
At 10 Hours
Neutral adjustment
Hose clamps: air intake / radiator / heater /
hydraulic
Walking beam width adjustment bolts
At 50 Hours Caster wheel anti-shimmy dampener bolts (if
installed)
Drive wheel lubricant
Hydraulic Oil Filters
169890
MAINTENANCE AND SERVICING
198.
1 Safety, page
Break-In Inspections
Item
313
1.
Check
Torque: 375 lbf·ft (510 N·m) dry.
Repeat checks at one hour intervals until
torque stabilizes at two consecutive checks
Tension
Torque: 120 ft·lbf (163 N·m)
Inboard bolt torque: 100 ft·lbf (135 N·m)
Outboard bolt torque: 85 ft·lbf (115 N·m)
Torque: 330 ft·lbf (448 N·m)
Torque: 330 ft·lbf (448 N·m)
Check. Dealer adjusted
Check. Refer to specific hose clamp section
Hand-tighten unless otherwise noted
Torque: 330 ft·lbf (448 N·m)
Inboard bolt torque: 100 ft·lbf (135 N·m)
Outboard bolt torque: 85 ft·lbf (115 N·m)
Change
Revision A