MacDon M105 Operator's Manual page 167

12. Remove lynch pin from clevis pin (A) in stand (B).
13. Hold stand (B) and remove pin (A).
14. Position stand to storage position by inverting stand
and relocating on bracket as shown. Reinsert clevis
pin (A) and secure with lynch pin.
15. Remove clevis pin from storage position (B) in linkage,
and insert in hole (A) to engage float springs. Secure
with hairpin.
16. Disengage safety prop by turning lever (A) downward
to release and lower safety prop until lever locks into
vertical position.
17. Repeat for opposite safety prop.
169890
OPERATION
Figure 4.133: Header Stand
Figure 4.134: Header Lift Linkage
Figure 4.135: Safety Prop
153
Revision A