MacDon M105 Operator's Manual page 248

1. Insert new primary filter element (A) into canister over
secondary element, and push into place, ensuring that
element is firmly seated in canister.
2. Align arrow (A) to UNLOCK position on end cap, and
push end cap fully onto housing.
3. Rotate end cap clockwise until catch (A) engages
housing to prevent end cap from turning.
4. Position end cap (B) onto filter housing with aspirator
pointing approximately down.
5. Secure end cap onto filter housing by closing latch (A).
169890
MAINTENANCE AND SERVICING
234
Figure 5.72: Engine Air Cleaner
Figure 5.73: Engine Air Cleaner
Figure 5.74: Engine Air Cleaner
Revision A