Operator's Seat Adjustments - MacDon M105 Operator's Manual

3.3 Operator's Seat Adjustments

The operator's seat has several adjustments. Refer to the following for the location and description of
each adjustment.
A – Armrest Up or Down
• Raise armrest (A) for easier access to the seat.
• Lower armrest (A) after seat belt is buckled.
B – Lumbar Support (Stiffness of Seat Back)
• Rotate knob (B) upward to increase stiffness.
• Rotate knob (B) downward to decrease stiffness.
C – Angle of Armrest
• Rotate knob (C) clockwise to increase armrest angle.
• Rotate knob (C) counterclockwise to decrease angle of
the armrest.
D – Angle of Seat Back
• Pull lever (D) up to release the seat back.
• Position seat back as desired.
• Release lever (D) to lock the seat back in position.
E – Seat Fore-Aft Position
• Pull lever (E) up to release the seat for adjustment.
• Move the seat forward or backward as desired.
• Release lever (E) to lock the seat in position.
169890
OPERATOR'S STATION
Figure 3.2: Seat Adjustments
A - Armrest
D - Seat Back Angle
37
B - Lumbar Support C - Armrest Angle
E - Seat Fore-Aft Position
Revision A