Red Tail Lights; Beacons (If Installed) - MacDon M105 Operator's Manual

1. Shut down engine and remove the key. Turn lights
OFF.
NOTE:
Hold onto handholds (A) on cab front corners and stand
on header anti-slip strips, or stand on maintenance
platform when accessing the amber lights.
2. Remove two screws (B) from lens, and remove lens.
3. Push and twist light bulb to remove from socket.
4. Install new bulb, ensuring that bulb base is properly
engaged in socket. Use Bulb Trade #1156.
5. Reinstall lens with screws (B).

Red Tail Lights

DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Shut down engine and remove key. Turn lights OFF.
2. In the grill of the hood, remove two screws (A) from
light (B), and remove light.
3. Remove connector from light.
4. Connect wiring harness to new light (B) and install light
with screws (A).

Beacons (if installed)

Warning beacons are available as an optional Dealer-installed attachment (MD #B5582).
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
169890
MAINTENANCE AND SERVICING
277
Figure 5.153: Amber Lights
Figure 5.154: Red Tail Lights
Revision A