MacDon M105 Operator's Manual page 325

Installing Formed Caster Wheel
1. Position wheel assembly (B) on hub, and install the six
wheel bolts (A).
2. Torque bolts (A). Refer to
Nuts, page 306.
3. Lower caster wheel. Refer to
(Formed and Forked), page
Caster Wheels Anti-Shimmy Shocks (MD #B5346) (if installed)
Each caster can be equipped with a fluid-filled anti-shimmy
dampener (A).
If installed, the mounting bolts (B) need to be checked
periodically for security.
Schedule, page 313.
• Inboard bolt should be tightened to 100 ft·lbf (135 N·m).
• Outboard bolt should be tightened to 85 ft·lbf (115 N·m).
169890
MAINTENANCE AND SERVICING
Tightening Caster Wheel
Lowering Caster Wheel
309.
Refer to
5.7.11 Maintenance
Figure 5.214: Caster Wheel Assembly
Figure 5.215: Anti-Shimmy Dampener
311
Revision A