Hid Auxiliary Lighting (Optional - Md #B5596) - MacDon M105 Operator's Manual

7. Match slots on new bulb (B) with lugs (D) in optical unit
and insert bulb into unit.
8. Secure bulb with wire retainer (A).
9. Push wire into connector (C).
10. Position light into light receptacle, ensuring top is up
and secure with bezel (C) and screws (B).

HID Auxiliary Lighting (Optional - MD #B5596)

Two optional High Intensity Discharge (HID) lights provide additional lighting during field operation.
Adjusting HID Auxiliary Lights (if Installed)
If installed, HID auxiliary lights are best adjusted with the machine in the field (or equivalent) to suit
Operator preference.
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
169890
MAINTENANCE AND SERVICING
272
Figure 5.142: Flood Light Assembly
Figure 5.143: Forward Flood Light
Revision A