MacDon M105 Operator's Manual page 271

13. Install new compressor belt (A).
14. Pry compressor away from engine so that a force of
8–12 ft·lbf (35–55 N·m) deflects the belt (A) 3/16 in.
(5 mm) at mid-span.
15. Tighten compressor mounting hardware (B).
16. Recheck tension and readjust as required.
17. Close the hood. Refer to
Position), page 203.
18. Close the platform. Refer to
(Standard Position), page
Tensioning Air Conditioner (A/C) Compressor Belt
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Shut down the engine and remove the key.
2. Open the hood. Refer to
Position), page 202.
3. Loosen compressor mounting hardware (B).
4. Pry compressor away from engine so that a force of
8–12 ft·lbf (35–55 N·m) deflects the belt (A) 3/16 in.
(5 mm) at mid-span.
5. Tighten compressor mounting hardware (B).
6. Recheck tension and readjust as required.
7. Close the hood, refer to
Position), page 203.
Replacing Air Conditioner A/C Compressor Belt
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Shut down the engine and remove the key.
2. Open the hood. Refer to
Position), page 202.
169890
MAINTENANCE AND SERVICING
5.4.2 Closing Hood (Lower
5.5.2 Closing Platform
206.
5.4.1 Opening Hood (Lower
5.4.2 Closing Hood (Lower
5.4.1 Opening Hood (Lower
Figure 5.116: A/C Compressor
Figure 5.117: A/C Compressor
257
Revision A