Miscellaneous Operational Information - MacDon M105 Operator's Manual

Display (lower or upper line)
##.# HEADER ANGLE
##.# HEADER SENSOR (flashing)
##.# VOLTS
FUEL |■■■■|■■■■|
ENGINE TEMP ### °F
ENGINE TEMP ### °C (if metric)
SCROLL
SUB-MENU (lower line lnly)
#### KNIFE SPEED
##.# HEADER HEIGHT
##.## ##.# REEL IND
##.# ##.# DRAP INDX
##.## REEL MIN RPM (lower line)
MINIMUM (lower line)

Miscellaneous Operational Information

Scroll through display with cab display module (CDM) switch or ground speed lever (GSL) switch.
Display (upper line)
< LEFT TURN ■
■ RIGHT TURN >
■ HAZARD ■
ROAD GEAR
HEADER ENGAGED
CENTER STEERING
169890
OPERATOR'S STATION
Description
Angle setting (00.0–10.0) header relative to ground. Optional
Sensor Disabled.
Engine electrical system operating voltage.
Level of fuel in tank.
Engine coolant temperature.
Displays sub-menu after 2–3 seconds. Press SELECT to cancel.
Scroll through sub-menu display with CDM switch.
Optional
9
Reel speed drops below programmed set-point.
Optional
9
Description
Indicates left turn when left arrow is pressed on CDM.
Indicates right turn when right arrow is pressed on CDM.
Indicates hazard warning lights are ON when hazard button is pressed
on CDM.
With High Range selected on Console switch.
Header drive engaged (engine will not start).
Center steering wheel and/or GSL not in N-DETENT.
66
.
9
Revision A