Filter Part Numbers - MacDon M105 Operator's Manual

If Fleetguard ES Compleat
heavy duty diesel engines and with a minimum of the following chemical and physical properties:
• Is formulated with a quality nitrite free additive package.
• Provides cylinder cavitation protection according to fleet study run at or above 60% load capacity.
• Protects the cooling system metals (cast iron, aluminum alloys, and copper alloys such as brass) from corrosion.
The additive package must be part of one of the following coolant mixtures:
• Ethylene glycol or propylene glycol base prediluted (40–60%) heavy duty coolant.
• Ethylene glycol or propylene glycol base heavy duty coolant concentrate in a 40–60% mixture of concentrate with
quality water.
Water quality is important to the performance of the cooling system. Distilled, deionized, or demineralized water is
recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate.
IMPORTANT:
Do NOT use cooling system sealing additives or antifreeze that contains sealing additives. Do NOT mix ethylene
glycol and propylene glycol base coolants. Do NOT use coolants that contain nitrites.

Filter Part Numbers

Table 5.16 M105 Filter Part Numbers
Filter
Engine Oil Filter
Charge Oil Filter
Return Oil Filter
Primary Fuel Filter Element
Fuel Strainer Filter
Secondary Fuel Filter Element
Fuel Filler Filter
Primary Element (CAB)
Primary Air Filter Element
Safety Air Filter Element
31. Located on the return manifold, closer towards the rear of the windrower.
32. Located on the return manifold, closer towards the middle of the windrower.
169890
MAINTENANCE AND SERVICING
®
is unavailable, use a coolant concentrate or prediluted coolant intended for use with
Part Number
MD #111974
MD #112419
MD #151975
MD #111972
MD #111608
MD #166312
MD #163989
MD #42445
MD #111954
MD #111955
200
31
32
Revision A