MacDon M105 Operator's Manual page 125

29. At the drawbar, connect the tow-bar harness plug (A)
to the receptacle on the windrower.
30. At the LH float spring tower, attach connector (A) on
windrower harness to towing harness receptacle (B).
31. Confirm that the flashing amber and signal lights on
header function properly.
32. Before moving the machine, double check that all pins
are secure, the drawbar and hitching components
are not showing signs of damage, and that all safety
equipment is installed and fully functional.
Converting from Transport Mode to Field Operation
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Stop engine and remove key from ignition.
169890
OPERATION
Figure 4.47: Towing Harness
Figure 4.48: Towing Harness
111
Revision A