Safety Signs; Installing Safety Decals - MacDon M105 Operator's Manual

Self-propelled windrower

Hide thumbs Also See for M105:

Table of Contents

1.10 Safety Signs

• Keep safety signs clean and legible at all times.

become illegible.

• If original parts on which a safety sign was installed are

replaced, be sure the repair part also bears the current

safety sign.

Parts Department.

To install a safety decal, follow these steps:

1. Clean and dry the installation area.

2. Decide on the exact location before you remove the decal backing paper.

3. Remove the smaller portion of the split backing paper.

4. Place the sign in position and slowly peel back the remaining paper, smoothing the sign as it is applied.

5. Prick small air pockets with a pin and smooth out.

Figure 1.19: Operator's Manual Decal