Density Adjustment - Ricoh Taurus-C1a Technical Bulletin

Reissued: 4-Jun-15
Model:
Taurus-C1a/C1b/P1 (D074/D075)
3.3 FR density adjustment
Software application 'Image View FR' contained in the NICE SD card calculates and
corrects the shading value in main scan direction and applies the corrections to the
engine (SP).
3.3.1 Preparation
IMPORTANT
Take note of all of the below before running the Image View FR application.
 First, check if the uneven density can be corrected in Adjustment
 Replace parts exceeding life, if any.
 Clean the dust shield glass of the laser unit.
 Clean the charge roller unit in Adjustment Settings for Skilled Operators
 Clean the doctor gap.
 Unzip 'installer zip file:NICE Image View FR V2.*.zip' and run 'set
echnical
T
Settings for Skilled Operators #0205 for Pro C651/ 751, Pro
C5100/5110, #0220 for Pro C901, SP2-113-001~004 for MP
C6502/8002. (Note that adjustments made in this menu take effect only
after power cycling the machine.)
If no improvement is confirmed after doing the above, set the value(s)
back to '0' and turn off/on the main power.
#0302 for Pro C651/751, #0210 for Pro C901.
up .exe'. DO NOT apply changes to the file directory.
ulletin
B
Date:
17-Jun-14
PAGE: 11/34
No.:
RD074119a