Ricoh Taurus-C1a Technical Bulletin page 157

Model:
Taurus-C1/P1 (D074/D075/M044)
4. Connect the debug cables to the BCU board.
-There are two connectors on the BCU board: one for the Master connector and one for
the Slave connector.
-If required, rotate the IOB/BCU Board to identify the location of the Master and the Slave
connectors on the BCU board by referring to the FSM section "4. Replacement and
Adjustment > Main Boards, HDD units > IOB, BCU".
IOB/BCU Board
Master
Connector
T B
echnical ulletin
Date:
15-Feb-12
PAGE: 3/9
No.:
RD074045
Slave
Connector