Table of Contents
Advertisement
Model:
Taurus-C1/P1 (D074/D075/M044)
11. Measure the distances (b1) and (b2) on all 5 copies and calculate the average.
12. Divide the average value by "2" and subtract that value from the current SP1501-001
value.
Average of
(b1) and (b2)
Example: 3.0 (mm)
The modified SP1501-001 value will be derived by adding instead of subtracting if the
trimming area of the 1
Average of
(b1) and (b2)
3 (mm)
13. Input the modified values in SP1501-001 and make another 11 copies of test pattern
Trimming Area (SP2109-003-14) in b/w, and duplex to check the results for the 4th
th
and 8
copies.
14. Finally, confirm the adjustments made are also reflected to papers of different weights.
If further adjustments are needed, modify the values in SP1001-001 ~ 007 accordingly.
See the last page of this bulletin for details.
This completes the image position adjustment.
T
echnical
Average
Current SP1501-
divided by 2
001 value
1.5
st
side is closer to the paper edge than that of the 2
Average
Current Value
divided by 2
of SP1501-001
1.5
B
ulletin
Date:
10-Apr-12
Modified SP1501-
001 value
1.0
- 0.5
Modified Value
of SP1501-001
1.0
2.5
PAGE: 10/16
No.:
RD074060
nd
side.
Advertisement
Chapters
Table of Contents
