Ricoh Taurus-C1a Technical Bulletin page 349

Model:
Taurus-C1/P1 (D074/D075/M044)
Procedure B
Maintain the settings made in the previous "Procedure A" and change the screen settings
on the Fiery controller (Job Properties – Image – Halftone Mode).
Change the default setting "200 Dot + Fine Text (1200dpi)" to one of the following and
check the results.
175 Dot (1200dpi)
150 Dot (1200dpi)
175 Line + Fine Text (1200dpi)
200 Dot (600dpi)
Note
1. The above settings are listed in the order of the effect the settings have on tone jump
(ineffective --> effective from top to bottom of the list). Generally, tone jump will
become less noticeable by applying a low resolution setting although with a trade-off in
image quality.
2. If the desired effect cannot be achieved, decrease the value applied in #203 (Adjust
Maximum Image Density) of the Skilled Operators Menu, execute #201 (Adjust Image
Density) and perform the color calibration on the Fiery controller. Note that this will
also lower the density of solid images and reduce the color gamut.
echnical
T B
Date:
ulletin
24-Sep-12
PAGE: 2/2
No.:
RD074091