Ricoh Taurus-C1a Technical Bulletin page 417

Model:
Taurus-C1a/C1b (D074/D075)
Background
The "pre near end" alert message that appears on the operation panel tends to cause the
users to replace the toner bottler earlier than the appropriate timing, and as a result, toner
could be wasted. The new firmware will delay the display of "pre near end" to correspond
with the "near end" alert timing of the ProC901/C901s series as shown in the diagram
below.
(Old firmware)
(New firmware)
* Number of pages is based on the following print conditions: A4, 8.75% coverage, 25 P/J
Notes on limitations:
 The new default value of 3% does not appear in the SP.
Current controller firmware (System/Copy ver1.13 or older for Copier, System ver1.07
or older for Printer) only supports an adjustment range of 10%~100%.
 DO NOT modify these SP values. Modifying these SP values will set the default value
back to 10%. Once modified, the new default value of 3% cannot be retrieved.
 Modify these SP values only when they need to be set to a value higher than 10%,
which should be decided based on the job operation requested by your customer.
 The above limitations will be resolved in the succeeding controller firmware version to
be released.
T B
echnical ulletin
Date:
30-Sep-13
PAGE: 2/2
No.:
RD074108