Ricoh Taurus-C1a Technical Bulletin page 59

Model:
Taurus-C1 / P1
<Main Machine \ Installation: Power Off \ Operation Panel: Easy Access Installation
>
Instructions were revised accordingly with the change in screw type.
Before the Revision
20. Check the hooks at
the operation panel [A] is hung correctly on the
mounting plate [B].
21. Fasten the operation panel and mounting plate
together ( x4). (You will need a short
screwdriver to attach screw [C]).
<Main Machine \ Installation: Power Off \ Attach Decals >
Description of decal attachment was newly added.
1. Attach the decals at the locations shown above.
[A] Precautions for Printing decal
[B] Original Set Precautions decal
[C] Cleaning, Prohibited Copying decals
T
echnical
and to make sure that
B
ulletin
Date:
21-Oct-11
After the Revision
6. Check the hooks at
operation panel [A] is hung correctly on the
mounting plate [B].
7. Fasten the operation panel and mounting plate
together ( x4 M4x6). (You will need a short
screwdriver to attach screw [C]).
• You must use the M4x6 screws to fasten the
operation panel at this step. If you use the
longer screws (M4x8) they could touch and
damage the operation panel board.
PAGE: 11/58
No.:
RD074026
and to make sure that the