Ricoh Taurus-C1a Technical Bulletin page 365

Reissued:18-Feb-13
Model:
Taurus-C1/P1 (D074/D075/M044)
Software installation procedure
1. Upgrade the firmware to the following versions or newer.
Firmware
System/Copy
System
OpePanel.EXP
Language Install
Web Support
2. Upgrade the Engine firmware to the special version in the table below with the door opened.(do
NOT close the front door until you complete step 5)
Firmware
Engine*
* This can be downloaded from GKM web site (ID: 169321).
3. Remove the SD card, and turn on the main power with the door opened.
Wait until the door open message appears on the operation panel.
4. Make sure that the value in SP2-814-097 is "137", and turn off the main power.
5. Upgrade the Engine firmware to the following version or newer with the door opened.
Item
Engine
6. Change the value in SP2-830-001 to "1".
7. Upgrade the MQP (Paper Library) file to the following version or newer.
MQP
Media Library
* folder name; mqp / SP5711-001
8. Finally, associate the media in the Paper Library in use with the desired tray.
echnical
T B
Copier
1.11
(D0745773K)
1.11
(D074688*C)
1.07
(D0746890B)
1.09
(D0745777E)
Copier
1.64a:04
(LR0599)
Copier
1.63:04
(D0745404K)
Copier
Rev.9 (NA)
Rev.12 (EU)
Rev.8 (AP)
Rev.3 (CN)
ulletin
Date:
08-Jan-13
Printer
1.06
(M0445773F)
1.11
(D074689*B)
1.07
(D0746891A)
1.07
(M0445777D)
Printer
1.64a:04
(LR0600)
Printer
1.63:04
(M0445404H)
Printer
Rev.9 (NA)
Rev.12 (EU)
Rev.8 (AP)
Rev.3 (CN)
PAGE: 9/20
No.: RD074097c