Table of Contents
Advertisement
Model:
Taurus C1/P1 (D074/D075/M044)
Solution
Start
Print 3 sheets of full-page solid and
1-dot halftone (SP2-109-003: "26"
and "11") on A3/DLT in black, cyan,
magenta, and green.
Does the line appear
at the same locations
on the printouts?
No
Clean the toner shield glass of
the affected color.
Print the job that had
the problem.
Yes
Has the problem
been resolved?
No
Clean the doctor gap.
(see Note 2)
Print the job that had the
problem.
Yes
Has the problem
been resolved?
Finished
echnical
T
Compare Cyan and Green prints
to verify if the white line is
caused by the Y dev unit.
Yes
Verify the dev unit causing the
problem.
Tip:
Since the PCDUs are positioned in
the order of Y, M, C, K from left to
right, if, for example, the problem is
observed in yellow and magenta,
check the M dev unit.
No
ulletin
B
Date:
27-Jan-13
Any foreign
substances
confirmed at the
bottom side of
the dev unit?
No
Contact your supervisor.
No.:
Yes
Clean the bottom
side of the dev
unit. (see Note1)
Print the job that had
the problem.
No
Has the problem
been resolved?
Yes
PAGE: 2/6
RD074112
Advertisement
Chapters
Table of Contents
