Ricoh Taurus-C1a Technical Bulletin page 74

Model:
Taurus-C1 / P1
• When the PCDU is locked correctly, the top of the lock lever is straight as shown above.
• If the PCDU is not locked correctly, the top of the lock lever is slanted slightly down to the left as
shown above.
4. If the PCDU lock lever is not locked correctly, pull the PCDU out about 30 mm (1.5 in.) and push it in again
so the top of the lock lever is level.
<Photoconductor Development Unit (PCDU) \ Drum Cleaning Blade > and
<Photoconductor Development Unit (PCDU) \ Drum Lubrication Blade >
"Important" note was deleted as it was irrelevant to the photo.
5. Disconnect the cleaning blade:
[A] Front ( x1)
[B] Rear ( x1)
• Work carefully around the edges of these sponge seals (shown as white lines above) to avoid
damaging them when removing and installing the blade. These seals are not service parts and cannot
be replaced.
T B
echnical ulletin
Date:
21-Oct-11
PAGE: 26/58
No.:
RD074026