Ricoh Taurus-C1a Technical Bulletin page 405

Reissued:1-Oct-13
Model:
Taurus-C1a/C1b (D074/D075)
IMPORTANT
Make sure to note the following points to prevent scratches on the surface of the
development roller.
DO NOT push and pull the tool.
DO NOT press the tool against the dev roller with your thumb.
DO NOT touch the roller with your fingers.
5. After sliding the tool across the doctor gap, remove the tool from the corner without the
tab.
NOTES
For a thorough cleaning of the doctor gap, it is recommended to repeat the cleaning
procedure 2 ~ 3 times.
The tool can be used many times. Use the other end of the tool or replace with a new
tool when the tab becomes worn and jaggy.
T B
echnical ulletin
Date:
27-May-13
PAGE: 4/4
No.:
RD074104a