Ricoh Taurus-C1a Technical Bulletin page 438

Model:
Taurus C1/P1 (D074/D075/M044)
NOTE
Both ends of the tool can be used. Locate the hole in the tool. Slide the tool from Right  Left
when inserting the end having the hole. Slide the tool from Left  Right when using the other end.
IMPORTANT
Make sure to note the following points to prevent scratches on the surface of the development
roller.
DO NOT push and pull the tool.

DO NOT press the tool against the dev roller with your thumb.

DO NOT touch the roller with your fingers.

echnical
T B
Use this end to slide Right  Left.
Use this end to slide Left  Right.
ulletin
Date:
27-Jan-13
PAGE: 5/6
No.:
RD074112