Model:
Punch Unit PU5020 (D449)
Subject:
Dip Switch setting for the Punch Unit
From:
1st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
Please make sure to set the dip switch according to your location, when replacing the PCB
board for the Punch Unit. (D449).
Location of the Dip Switch
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
B
ulletin
Date:
26-Mar-12
Prepared by:
Part information
Electrical
Transmit/receive
Other (
)
PAGE: 1/2
No.:
RD074055
Shinnosuke Sasaki
Action required
Service manual revision
Retrofit information
Tier 2