Table of Contents
Advertisement
Reissued:04-Jul-12
Model:
Taurus-C1/P1 (D074/D075/M044)
Action a: Adjusting the Paper Transfer Gap
For each affected paper:
1. Specify "Small Gap" for "Custom Paper Advanced Settings: 43 Adjust Gap of Paper
Transfer:".
2. Specify "Large Gap" ONLY if sufficient improvement cannot be confirmed from the
previous adjustment. If the results show no difference between "Small Gap" and
"Large Gap", specify "Small Gap".
NOTE
The modified Custom Paper Settings value will enlarge the gap between the ITB and
PTR, which will reduce the chances of shock jitter.
NOTE2
"Large Gap" should be applied ONLY when better results are obtained in comparison
with "Small Gap", due to the following possible side effects when specifying "Large
Gap":
1. Low image density on leading and trailing edges
2. Even worse shock jitter
Note that the thicker the paper, the larger the risk of the above side effects.
T
B
echnical
ulletin
Date:
24-Oct-11
PAGE: 3/11
No.:
RD074029d
Advertisement
Chapters
Table of Contents
