Ricoh Taurus-C1a Technical Bulletin page 89

Model:
Taurus-C1 / P1
< Special Troubleshooting Procedures \ MUSIC Adjustment Result >
Before the Revision
No. Result
0 Not done
Completed
1
successfully
Cannot detect
2
patterns
Fewer lines on
3 the pattern
than the target
More lines on
4 the pattern
than the target
Out of the
5 adjustment
range
6-9 Not used
< Special Troubleshooting Procedures \ Troubleshooting for Image Quality
Problems \ Development-related Troubleshooting \ Vertical White Line >
Step 1 of "Solution" was modified.
Before the Revision
Solution:
1. Print three full-page, solid-fill (SP2-109-003: "26")
A3 or DLT sheets and 1 dot halftone
(SP2-109-003: "11") A3 or DLT sheets for each of
black, cyan, magenta, and green.
To make a full-green coverage page
• Select No.26 (Full Dot Pattern) with SP2-109-003.
• Select "1" (Full Color) with SP2-109-5.
• Open SP2-109-6 and change Density M from "15"
to "0".
• Open SP2-109-7 and -9 and make sure that
Density C and Density Y are both set "15"
(default settings).
T
echnical
Description
MUSIC has not been done.
MUSIC has been done
correctly.
ID sensors have not
detected the patterns for
MUSIC.
The patterns detected by
the ID sensors are not
complete enough for
MUSIC.
Not used in this machine.
ID sensors have correctly
detected the patterns for
MUSIC, but the position of
the patterns is too far away
from the adjustable range.
-
B
ulletin
Date:
21-Oct-11
After the Revision
No. Result
0 Not done
Completed
1
successfully
Cannot detect
2
patterns
Fewer lines on
3 the pattern
than the target
Out of the
5 adjustment
range
6 Belt damage
After the Revision
Solution:
1. Print three full-page, solid-fill (SP2-109-003: "26")
A3 or DLT sheets and 1 dot halftone
(SP2-109-003: "11") A3 or DLT sheets for each of
black, cyan, magenta, and green.
To make a full-green coverage page
• Select No.26 (Full Dot Pattern) with SP2-109-003.
• Select "1" (Full Color) with SP2-109-5.
• Open SP2-109-6 and change Density K from "15"
to "0".
• Open SP2-109-8 and change Density M from "15"
to "0".
• Open SP2-109-7 and -9 and make sure that
Density C and Density Y are both set "15" (default
settings).
PAGE: 41/58
No.:
RD074026
Description
MUSIC has not been done.
MUSIC has been done
correctly.
ID sensors have not
detected the patterns for
MUSIC.
The patterns detected by the
ID sensors are not complete
enough for MUSIC.
ID sensors have correctly
detected the patterns for
MUSIC, but the position of
the patterns is too far away
from the adjustable range.
Accurate detection is not
possible due to damage to
the ITB.