Ricoh Taurus-C1a Technical Bulletin page 201

Reissued:30-Apr-13
Model:
Taurus-C1a/C1b (D074/D075)
8. Confirm the sensors are clean using a flashlight. Dust on the sensor is hard to detect in room
light.
9. Reinstall the unit
10. Turn the machine on. Wait until the machine is ready.
11. Execute SP2-912-001 (Encoder Sn:Adj Light: Adj Light Amt).
12. Turn the main switch off and then on.
13. Execute SP2-914-001 (Encoder Sn:Get 1stPhase: Get Phases: Execute All).
14. Turn the main switch off and then on.
15. Check the value of SP2-915-001 (Encoder Sn Ctrl Condition: Scale FB Control Enable)
 If the value is "1", the feedback control is properly turned on.
 If the value is "0," repeat the sensor cleaning procedure.
16. Execute SP3011-4 (Manual ProCon :Exe: Full MUSIC).
17. Exit the SP mode to complete the procedure.
T B
echnical ulletin
Date:
14-Mar-12
PAGE: 4/4
No.:
RD074053c