Ricoh Taurus-C1a Technical Bulletin page 70

Model:
Taurus-C1 / P1
< PM Tables for Peripherals >
PM Tables for the following 4 peripherals were added.
Cover Interposer Tray (D518)
Ring Binder (D519)
High Capacity Stacker (D515)
Trimmer Unit (D520)
< Lubrication Points \ Cleaning, Lubrication Around Fusing Unit Heating Roller >
This section was deleted due to the procedure for lubricating the Heating Roller Bearings
is no longer needed.
< Cleaning Points \ Inspection and Cleaning \ Left Drawer >
The "Cooling Belt Idle Rollers" that were assembled in the pre-mass production unit were
eliminated in the mass production. These rollers were deleted from the illustration
accordingly.
Also, a correction was made for the "Exit Sensor" that was illustrated in the incorrect
position.
Before the Revision
T B
echnical ulletin
Date:
21-Oct-11
After the Revision
PAGE: 22/58
No.:
RD074026