Ricoh Taurus-C1a Technical Bulletin page 282

Model:
Taurus-C1a/C1b/P1 (D074/D075/M044)
3. Replacing with the modified sheet mylar D0742437
echnical
T B
ulletin
Date:
13-Jun-12
3-1. Remove the sheet mylar
from the frame and clean
the surface with solvent so
that adhesives do not
remain.
NOTE
1) Work carefully to prevent solvent
from adhering to areas other than
the surface of the stay, for instance,
the urethane blade / entrance seals,
brush roller, etc.
2) Flip the Sheet upwards when
peeling off to avoid its contact with
the Brush Roller as shown in the left
photo.
3-2. Attach the new sheet mylar
D0742437 to the frame. The
top edge of the mylar
should align with the top
edge of the frame.
NOTE: Confirm clean attachment; no
air-bubbles, peel-offs. Work carefully to
prevent the Mylar from adhering to the
Brush Roller.
3-3. Reassemble the component
parts.
PAGE: 5/6
No.:
RD074074