Table of Contents
Advertisement
Reissued:18-Feb-13
Model:
Taurus-C1/P1 (D074/D075/M044)
(d) Dirty trailing edge of the paper every 20 mm (see limitation list #3, 4)
Symptom
Cause
The separation bias has been turned off for textured paper so that it does not interfere with the paper
transfer current. Therefore, paper might go up and attach to the belt cleaning section after going through the
paper transfer area.
Action
Adjust the separation voltage. Specify the following settings according to the thickness of the paper being
used.
Advanced Settings
48: Txt Ppr: Ppr Trns Isolatn Voltag: Side
1 (SP2-825-xxx)
49: Txt Ppr: Ppr Trns Isolatn Voltag: Side
2 (SP2-826-xxx)
1. Adjust the separation voltage according to the thickness of the paper being used.
2. Print the image to confirm if the problem was resolved.
Possible Side Effect
Enabling the separation voltage may cause vertical white streaks to appear.
echnical
T
B
Paper Weight 1
11
11
ulletin
Date:
08-Jan-13
Paper Weight 2-3
10.4
10.4
PAGE: 15/20
No.: RD074097c
Paper Weight 4-7
9
9
Advertisement
Chapters
Table of Contents
