Ricoh Taurus-C1a Technical Bulletin page 159

Model:
Taurus-C1/P1 (D074/D075/M044)
Setting up Tera Term (Log Monitor)
1. Activate Tera Term.
Activate two Tera Term windows on your PC for Master and for Slave.
Active the two Tera Terms on your PC. Active the two Tera Terms on your PC.
2. Open "Terminal setup" by selecting [Setup] > [Terminal], and specify the settings as
shown below. Do this procedure for the two Tera Terms.
3. Open "Serial port setup" by selecting [setup] > [Serial port], and specify the settings as
below. Do this procedure for the two Tera Terms. Check the "Port" for each Tera Term.
T B
echnical ulletin
Date:
15-Feb-12
PAGE: 5/9
No.:
RD074045