Ricoh Taurus-C1a Technical Bulletin page 85

Model:
Taurus-C1 / P1
Indication of the sensor position was corrected.
Before the Revision
< Duplex Motors and Rollers >
Corrupted image of the paper path was revised.
Before the Revision
6. Troubleshooting
< SC Tables \ SC200: Image Writing >
SC206: False description was corrected.
Before the Revision
After the C, K polygon motor turned on, or
within 10 sec. after the rpm's changed,
the motor did not achieve motor lock
(READY) status.
SC208: False description was corrected.
Before the Revision
The C,K polygon motor left the lock status
once after the motor achieved regular
rotation speed.
T B
echnical
After the
within 10 sec. after the rpm's changed,
the motor did not achieve motor lock
(READY) status.
The
once after the motor achieved regular
rotation speed.
ulletin
Date:
21-Oct-11
After the Revision
After the Revision
After the Revision
Y,M polygon motor turned on, or
After the Revision
Y,M polygon motor left the lock status
PAGE: 37/58
No.:
RD074026