Table of Contents
Advertisement
Model:
Taurus-C1a/C1b (D074/D075)
Subject:
Troubleshooting Lines/Streaks caused by toner offset
From:
1st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
Symptom
Toner offset resulting in unwanted lines/streaks in the paper feed (sub-scan) direction
Cause
Toner contamination on the rollers, ribs, or strippers
Action
Locate and clean the affected roller(s), rib(s) or stripper(s) using the following charts.
1. Lines/streaks caused by Ribs ...................................................................................... 2
2. Lines/streaks caused by Rollers and Strippers ............................................................ 5
3. Lines/streaks caused by Fusing Stripper Plates .......................................................... 8
echnical
T
Troubleshooting
Mechanical
Paper path
Product Safety
ulletin
B
Date:
13-Sep-12
Prepared by:
Part information
Electrical
Transmit/receive
Other (
)
PAGE: 1/9
No.:
RD074089
Shinnosuke Sasaki
Action required
Service manual revision
Retrofit information
Tier 2
Advertisement
Chapters
Table of Contents
