Ricoh Taurus-C1a Technical Bulletin page 485

Reissued:14-Oct-14
Model:
Taurus-C1a/C1b (D074/D075)
D) Manually rotating the drum
1. Insert the jigs [A] between the development unit and drum at both front and rear sides
as shown in the photos below. This will prevent damages to the side seals when
rotating the drum in the next step.
2. Slowly make 1 or 2 full rotations of the drum to even out the lubricant powder.
3. Remove the jigs.
4. Install the charge unit.
echnical
T B
ulletin
Date:
10-Jun-14
PAGE: 6/7
No.:
RD074120a