Table of Contents
Advertisement
Model:
Taurus-C1a/C1b/P1 (D074/D075/M044)
2. Attaching the new mylar D0742477
8mm
a)
9mm
b)
Attach D0742477 to
the inside of the line.
c)
echnical
T
B
ulletin
Date:
13-Jun-12
2-1. Peel off the 2 mylars and
clean the surface with
solvent.
NOTE: Work carefully to prevent
solvent from adhering to areas other
than the surface of the stay, for
instance, the urethane sponge.
2-2. Attach the D0742477.
a) Mark a reference point at
8mm from the edge of the
stay.
b) Draw a line from the reference
point leaving 9mm of space at
the bottom.
c) Attach the D0742477 (2pcs)
on both sides so that they are
inside the reference line.
NOTE: Confirm clean attachment;
no-air bubbles, peel-offs.
PAGE: 4/6
No.:
RD074074
Advertisement
Chapters
Table of Contents
