Ricoh Taurus-C1a Technical Bulletin page 307

Model:
Taurus-C1/P1 (D074/D075/M044)
Subject:
Notes on handling the PCDU
st
From:
1 PP Tech Service Sec., PP Tech Service Dept.
Classification:
This RTB has been issued to announce the following notes on handling the PCDU.
When servicing the PCDU, never remove the black plastic plate from the metal frame of
the PCDU (see the next page). Removing this plate could result in sharp bands that
appear at 50mm intervals as shown in the photo below.
About 5mm-width bands appear at 50mm pitch. Bands approx 5mm wide appear in 50mm pitch.
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
B
ulletin
Date:
18-Jul-12
Prepared by:
Part information
Electrical
Transmit/receive
Other ( )
PAGE: 1/2
No.:
RD074080
K. Tsutsui
Action required
Service manual revision
Retrofit information
Tier2