Reissued:25-Oct-13
Model:
Taurus-C1a/C1b
4.
Rub the polisher against the fusing belt to smooth out the scratches. Rotate the fusing belt
clockwise to polish the entire belt.
although this will depend on the condition of the scratches.
Note
See the photo and diagram below for the appropriate amount of pressure that should be
applied when polishing the belt.
T
B
echnical
Rub approximately 30 times for each location,
ulletin
Date:
27-Jun-13
PAGE: 3/6
No.:
RD074107a