Table of Contents
Advertisement
T
B
echnical
ulletin
PAGE: 32/58
Model:
Date:
No.:
Taurus-C1 / P1
21-Oct-11
RD074026
The following was added as a procedure required after replacement with a new hot roller.
After New Hot Roller Installation
A newly installed hot roller may have a tendency to catch and cause spurious noise. Do the following
procedure to avoid this problem.
1. Remove the top cover screws (
x2,
x1).
2. Remove top cover [A].
3. Loosen screw [B] (
x1 M3x6).
4. Slide plate [A] to the rear.
5. Remove separation unit [B].
6. Lower the spring arm for position [A] to [B] as shown above.
Advertisement
Chapters
Table of Contents
