Ricoh Taurus-C1a Technical Bulletin page 39

Reissued:24-Aug-11
Model:
Taurus-C1 (D074/D075)
Check Procedure
1. A ream of paper is sealed in a plastic bag and loaded in Tray 2 at the factory. Set this
paper in Tray 2. This paper is produced in Japan and is the same brand used for print
samples included with the accessories.
2. Set the mode to "copy mode". (Brightness of the image will differ from the samples from
the factory if printed via EFI.)
3. Do the SPs in sequence as in the table below for a total of 11 test patterns.
Print Image Color
Print Test
1 BK
Pattern Overall
Print Test
2 C
Pattern Overall
Print Test
3 M
Pattern Overall
Print Test
4 Y
Pattern Overall
Print Test
5 R(MY)
Pattern Overall
Print Test
6 G(CY)
Pattern Overall
Print Test
7 B(MC)
Pattern Overall
Print Test
8 BK
Pattern 4by4
Print Test
9 C
Pattern 4by4
Print Test
10 M
Pattern 4by4
Print Test
11 Y
Pattern 4by4
4. Confirm that the image quality is the same by comparing the output against the print
samples from the factory.
T
echnical
Step 1 Step 2
SP2109-003 SP2109-005
26: Full Dot
5: Black
Pattern
26: Full Dot
2: Cyan
Pattern
26: Full Dot
3: Magenta
Pattern
26: Full Dot
4: Yellow
Pattern
26: Full Dot
1: Full Color
Pattern
26: Full Dot
1: Full Color
Pattern
26: Full Dot
1: Full Color
Pattern
13:Independent
5: Black
Pattern (4 dot)
13:Independent
2: Cyan
Pattern(4 dot)
13:Independent
3: Magenta
Pattern(4 dot)
13:Independent
4: Yellow
Pattern(4 dot)
B
ulletin
Date:
19-Aug-11
SP2109- SP2109-
006(K) 007(C)
15(default) 15(default) 15(default) 15(default)
15(default) 15(default) 15(default) 15(default)
15(default) 15(default) 15(default) 15(default)
15(default) 15(default) 15(default) 15(default)
0
0 15(default)
0 15(default) 15(default)
15(default) 15(default) 15(default) 15(default)
15(default) 15(default) 15(default) 15(default)
15(default) 15(default) 15(default) 15(default)
15(default) 15(default) 15(default) 15(default)
PAGE: 2/2
No.:
RD074018a
Step 3
SP2109- SP2109-
008(M) 009(Y)
0 15(default) 15(default)
0 15(default)
0