Model:
Taurus-C1/P1 (D074/D075/M044)
5. Connect the debug cables to each of the connectors on the BCU board.
Cable for the
Cable for the
Master connector
Master connector
NOTE: The two cables for Master and
Slave are different in this photo but there
are no differences in their functions.
Please use a cable in hand.
hand.
6. Connect the other end of the debug cables to the serial port or to the USB port on the
PC using a USB-serial conversion cable.
Connect the two cables to your PC.
Connect the two cables to your PC.
T
B
echnical
Cable for the
Cable for the
Slave connector
Slave connector
ulletin
Date:
15-Feb-12
PAGE: 4/9
No.:
RD074045