Ricoh Taurus-C1a Technical Bulletin page 199

Reissued:30-Apr-13
Model:
Taurus-C1a/C1b (D074/D075)
5. Remove the sensor bracket [D] (Screw x1).
6. Carefully move the belt [A] to the non-operator side until the sensor [B] is uncovered.
Note
It is recommended to wear gloves when moving the ITB.
Do not further move the belt once the sensor is uncovered. Doing so could damage the belt.
T B
echnical ulletin
Date:
14-Mar-12
PAGE: 2/4
No.:
RD074053c
[D]
[A]
[B]