Ricoh Taurus-C1a Technical Bulletin page 481

Reissued:14-Oct-14
Model:
Taurus-C1a/C1b (D074/D075)
What needs to be done
Do the new procedures A~B where indicated with the tick () which depend upon the
maintenances performed for the drum and drum cleaning unit (1~6 and their
combinations).
1 Drum: Replaced
2 Drum: Cleaned
3 Drum: Reset
4 Cleaning unit: Replaced
5 Cleaning unit: Cleaned
6 Cleaning unit: Reset
Drum/Cleaning unit:
1+4
Replaced.
Drum: Replaced
1+5
Cleaning unit: Cleaned
Drum: Replaced
1+6
Cleaning unit: Reset
Drum: Cleaned
2+4
Cleaning unit: Replaced
Drum/Cleaning unit:
2+5
Cleaned
Drum: Cleaned
2+6
Cleaning unit: Reset
Drum: Reset
3+4
Cleaning unit: Replaced
Drum: Reset
3+5
Cleaning unit: Cleaned
3+6 Drum/Cleaning unit: Reset
IMPORTANT
If maintenance has to be performed for the PCDU and ITB unit/ITB cleaning unit, make
sure to completely finish the maintenance of either of the units before working on the other
unit, to prevent the system from running the initialization process without sufficient
lubrication.
See the following pages for details on each procedure.
echnical
T B
A) B)
Lubrication of Lubrication of
the cleaning the cleaning
brush blade edges
 
 
 
 
 
 
 
 
ulletin
Date:
10-Jun-14
C) D)
Lubrication of Manually
the drum rotating the
drum








PAGE: 2/7
No.:
RD074120a
E)
Initializing the
cleaning unit



 
 

 
 

 
 

 
 
