Table of Contents
Advertisement
Reissued:2-Sep-13
Model:
Taurus-C1/P1 (D074/D075/M044)
D
Note
There are two types of drum charge units; one with washers [B] and one without
washers.
If you find any grease adhered to the drum charge roller, wipe it off with a clean wet
cloth and wait until the surface dries naturally. DO NOT use ethanol or organic
solvent to clean the charge roller. Doing so will damage the charge roller.
4. Put the drum charge roller back in its case in two steps. First, place the drum charge
roller on the case so that the projections [A] on both ends are inside the slits. Then,
press down both ends and confirm correct installation by the click sound.
Note
Take notice of the electrodes [A] to avoid injuries when pressing down the drum charge
roller.
5. Install the drum charge unit according to the service manual to complete the
procedure.
T
B
echnical
[A]
ulletin
Date:
29-Feb-12
[A]
PAGE: 3/3
No.:
RD074048a
Advertisement
Chapters
Table of Contents
