Ricoh Taurus-C1a Technical Bulletin page 269

Model:
Taurus-C1/P1 (D074/D075/M044)
2. Remove the drum cleaning unit [A] from the PCDU. (Refer to the field service manual.)
[A]
[B]
3. Use your fingers to apply the Zinc Stearate Powder on the front cleaning blade edge
and seal [C] AND rear cleaning blade edge and seal [B]. Especially, powder should be
applied on the edge of cleaning blade [D] (indicated with the circle in the above photo.)
The photos below show the drum cleaning unit before/after applying the lubricant powder.
Before
echnical
T B
[D]
Make sure the powder covers this corner
ulletin
Date:
24-May-12
[C]
PAGE: 3/4
No.:
RD074071
After