Ricoh Taurus-C1a Technical Bulletin page 102

Model:
Taurus-C1 / P1
< Appendix: Specifications \ Main Specifications \ Main Machine Options \ A3/DLT
Tray Kit B8331 (Option) >
Supported paper weight was changed as follows:
52 - 210 g/m2
< Appendix: Specifications \ Peripheral Specifications \ Decurler Unit DU5000 Unit
(D544) >
Power Consumption was corrected as follows::
Less than 30V
< Appendix: Specifications \ Peripheral Specifications \ Booklet Finisher
SR5040/5030 (D512/D513) \ Punch Unit PU5000 (D449) (Option) >
AP (Asia-pacific) was added to the "2/4 hole selectable" along with Europe.
< Appendix: Service Program Mode Tables \ Group 1000 >
Before the Revision
1001 Lead Edge Reg
Adjusts the printing leading edge registration using
the trimming area pattern (Pattern No)
1003 Side-to-Side Reg
Adjusts printing side-to-side registration for each
feed station, using the test pattern (Pattern No.)
1013 Fine Adj Exit Motor Speed
20 to 21 Envelope: Weight 5 to 6
1929 De-curl Line Speed Adj: Default
[-2.5 to +12.5 / 0 / 0.5%]
T
echnical
52.3 to 300 g/m2
Less than 30W
-
-
-
-
-
-
-
-
-
-
-
B
ulletin
Date:
21-Oct-11
After the Revision
1001 Lead Edge Reg
Adjusts the printing leading edge registration using
the trimming area pattern SP2109-3 (Pattern No. 14)
1003 Side-to-Side Reg
Adjusts printing side-to-side registration for each
feed station, using the test pattern printed with
SP2109-3 (Pattern No. 14)
1013 Fine Adj Exit Motor Speed
20 to 22 Envelope: Weight 5 to 7
23 OHP
1021 Skew Detect was added.
1302 Dbl-Feed Detect was added.
1303 After Dbl-Feed Det Op Set was added.
1802 PPM Information was deleted.
1906 Decurler Setting
"Upper pass 2" was added.
1929 De-curl Line Speed Adj: Default
[-2.5 to +12.5 / 1 / 0.5%]
1946 Set Coolant Level Sensor was deleted.
1950 Image Pos: Sub: Side1 was added.
1951 Image Pos: Sub: Side2 was added.
1952 Image Pos: Main: Side1 was added.
1953 Image Pos: Main: Side2 was added.
1955 Skew Detect was added.
PAGE: 54/58
No.:
RD074026