Table of Contents
Advertisement
Reissued:24-Aug-11
Model:
Taurus-C1 (D074/D075)
RTB reissue
Notes in bold italics were revised.
Subject:
Request Regarding Reference Print Samples
RCL Factory
From:
PP Service Planning Department 1G
Classification:
This RTB has been issued to make the following request regarding the print samples
included
at the RCL factory
Request
Please make sure all the print samples are collected after site installations and are NOT
left at customer sites.
Background
These print samples are printed and packaged at the
to be used as a reference for checking initial image quality generated from units newly
installed.
Although this image check is not a mandatory process, you may do the check by referring
to the procedures on the following page if you are concerned with the initial image quality
observed from a newly installed unit.
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
as accessories to the Taurus.
If not needed, you may discard the samples.
B
ulletin
Date:
19-Aug-11
Prepared by:
from
Part information
Electrical
Transmit/receive
Other (
)
RCL
factory, and they are supposed
PAGE: 1/2
No.:
RD074018a
K. Tsutsui
Action required
Service manual revision
Retrofit information
Tier 2
Advertisement
Chapters
Table of Contents
